QuickJack 7000TL Portable Car Lift

Why Buy From Garage Exotica?

🚚 Ships direct from the factory in 5 business days
🛡️ 1 Year Warranty (Extendable to 2 Years)
✅ Fast U.S. shipping on all orders
💬 Real customer support when you need it

7000TL Portable Light Duty Truck and Passenger Car Lift System

QuickJack 7000TL is the only portable truck lift capable of getting trucks and SUV tires completely off the ground. With the addition of the optional Light Truck & SUV Adapters, the 7000TL has an incredible 27" lifting height. 7000TL is the highly-anticipated sequel to the most popular automotive tool to ever hit the home garage or auto repair shop. With the ability to lift an extra 3 inches, 7000TL portable car lift provides more room to tackle every repair and maintenance task on vehicles, trucks, and SUVs weighing up to 7,000 lbs.

Through superior engineering and design, we've been able to produce an extra 3-inches of lifting height without sacrificing the overall dimensions that has made QuickJack a must-have in your garage. 7000TL still has an impressive 3.5" lowered height, 70.75" overall length, and 12.5" overall width.

What's the difference between the NEW TL Models vs. SLX Models?

The biggest difference between the 7000TL and BL-7000SLX is the lifting height, which has increased 3 inches. This provides ample room to perform all the common vehicle maintenance tasks and allows you the capability to perform even the most complicated repairs.

Overall dimensions have remained the same, so you'll continue to benefit from what made QuickJack so popular in the automotive community and that is its super-low 3.5" lowered height. The minimum lifting point spread did change from 31.5" to 37", but this will not make a difference to the vast majority of 7000TL users.

QuickJack specifications diagram

Lifting capacity

7,000 lbs. (2,268 kg)

Lowered height

A - Frame only: 3.5" (89 mm)

B - With 2" block: 4" (102 mm)

Lifting height

D - With 2" block: 21.5" (546 mm)

E - With 3" block: 22.5" (572 mm)

F - Max. height: 24.5" (622 mm)

G - With adapters: 24.25" (610 mm)

H - With adapters + pin: 27" (686 mm)

Compare All Specifications

Lift point spread

I - Maximum: 60" (1,524 mm)

J - Minimum: 37" (940 mm)

Frame dimensions (ea.)

K - Width: 12.5" (318 mm)

L - Length: 70.75" (1,797 mm)

A - Height: 3.5" (89 mm)

Weight 98 lbs. (45 kg)

Other specs

Time to full rise: 30 seconds

Power unit weight: 15 lbs. (7 kg)

Shipping dimensions (ea. frame):

73.75" (L) x 16.75" (W) x 6.25" (H)

(1,872 mm x 425 mm x 155 mm)

Shipping weight: 280 lbs. (127 kg)

DISCLAIMER

BendPak makes no promises, guarantees or assurances that our products meet any state, county, federal or international mandated permit, license, code, standard, certification, or any other mandate other than what is listed or shown on BendPak website(s), or any BendPak online or published catalog. Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-(current edition) or ANSI/UL 201. Consult www.autolift.org for a complete list of lift models that meet ANSI/ALI ALCTV-(current edition) or ANSI/UL 201, or contact BendPak via contact@bendpak.com. Buyer assumes full responsibility for any state, county, federal or international mandated permit, license, code, standard, certification, or any other mandate required related to the installation and/or operation of any BendPak or Ranger product. BENDPAK will not be responsible for any charges, fines, liens, or other levies imposed on the Buyer related to any special or regional structural, seismic or any other building code and/or codes such as the Uniform Building Code (UBC), International Building Code (IBC), or any other state, county, federal or international mandated permit, license, code, standard, certification, or other mandate, law, rule, regulation or directive by any other agency, government, administrations, or corporations whether state, county, federal, or international mandated.