CARPRO Lift is a highly concentrated pre-wash alkyl snow foam that dissolves and softens dirt and grime so it can be easily removed during the wash. Suitable for use with all foaming tools, canisters, guns and pressure washers, it produces a thick foam designed to prep the most embattled areas of the vehicle and soften bugs, baked-on dirt and more.
Features
- Highly concentrated pre-wash foam agent
- Works with all foaming tools, canisters, guns and pressure washers
- Formulated for maximum wetting and rinses off easily
- Not a superficial high-foaming product: designed as a true active surface agent whose bubbles soak hardened debris during the dwell period so it releases with ease during the wash
- Can be used as a pre-wash or as a single wash solution
- Available in 500ml and 1L
Note: CARPRO Lift contains the punch of an all purpose cleaner unless you heavily dilute it. It will strip waxes and some sealants from vehicles if used at a 1:10 ratio.
How to use
As a pre-wash solution:
- Use only on cool surfaces. Do not use in direct sun. Do NOT allow to dry on surface.
- Dilute Lift with water (we recommend 1:10). You can use leaner ratios for a more flowing mixture or a richer ratio for a denser foam.
- Allow the product to remain on the surface for a minute, or as long as possible without allowing it to dry.
- Power rinse off. This completes your Lift pre-wash.
- Wash with CarPro Reset.
As a single wash solution:
- Use only on cool surfaces. Do not use in direct sun. Do not allow shampoo to dry on the surface.
- Pre-rinse vehicle with free-flowing water to remove loose debris.
- Dilute Lift with water (we recommend 1:10). You can use leaner ratios for a more flowing mixture or a richer ratio for a denser foam.
- Allow the product to remain on the surface for a minute, then wash from the top down using your favorite wash mitt.
- It's critical to rinse your mitt or sponge periodically in a second bucket filled with clear water or with a hose.
- After washing, rinse the vehicle thoroughly with free-flowing water to remove shampoo residue, and dry with a Microfiber Madness Chipmunk.
