UP TO 2 YEARS OF GEL COAT PROTECTION IN ONE COAT.
Beadlock Pro Marine is an SiO2 ceramic coating formulated for hot, humid marine environments. It runs about 2.5x the concentration of standard Beadlock Pro, so porous gel coat gets full protection from a single layer instead of several. Once cured it delivers up to 9H hardness, strong water beading and a slicker surface that stays clean longer.
- Up to 2 years of protection with proper care (manufacturer rating)
- Single-layer application on gel coat
- Use on gel coat, rub rails, metal, glass and painted plastics
- Also suited for trailers, RVs and personal watercraft
- 50 ml covers roughly a 23 ft boat
Directions: Prep the surface with Throw Back panel wipe (polish first if needed, then wipe again). Shake well, apply to the applicator and spread evenly. When it shows a light rainbow flash (45 to 60 seconds), level with a clean microfiber, then lightly wipe again with a second towel. Wait 1 hour between coats and avoid water for 48 hours while it cures.
Note: cannot ship by air.
