8000TLX Extended-Length Portable Truck and SUV Lift
The QuickJack 8000TLX is the highest-capacity, extended-length portable lift in the lineup — engineered specifically for heavy-duty trucks, SUVs, and long-wheelbase vehicles. With an 8,000-lb. lifting capacity and a 66-inch max lift point spread, it handles jobs that standard car lifts can’t touch. Built tough yet fully collapsible, this portable truck lift gives you full access beneath your vehicle without the footprint of a permanent setup.
Despite its size, the 8000TLX reaches max rise in about 30 seconds, and its low 3.5-inch collapsed height means it can fit under most sedans and sports cars too. Add the optional Truck & SUV Adapter Kit for even more undercarriage access on higher-clearance vehicles. Upgrades include a pressure-compensated flow divider for synchronized lifting, reinforced frame geometry, and a factory preassembled hydraulic system for faster setup, smoother operation, and maximum durability at home or in the shop.
The 76-inch frames are designed for serious reach but remain compact enough to roll and stow easily using QuickJack’s built-in urethane wheels. Take it anywhere — garage, driveway, shop, or even off-site — as long as you’ve got a flat surface to work on.
Extended-Length Design & Lift Point Specs
The 8000TLX was engineered to accommodate long-wheelbase vehicles with lift points that exceed standard lengths. Its frame and lift point spread are 6 inches longer than TL models, so be sure to measure before purchasing for shorter vehicles.
- TL minimum lift point spread: 37"
- TLX minimum lift point spread: 43"
- TL maximum lift point spread: 60"
- TLX maximum lift point spread: 66"
- TL overall frame length: 70"
- TLX overall frame length: 76"
What’s Different About the NEW TLX Models?
The 8000TLX delivers a full 1,000-lb. boost in capacity over the 7000TLX and includes the latest QuickJack upgrades: reinforced structural components, an upgraded hydraulic system, and a safer, more stable lift cycle. Best of all, it still folds to just 3.5 inches for easy storage and portability.
Already Own a QuickJack? Upgrade with TLX Frames
The 8000TLX left and right frames are available for purchase separately. If you already have a compatible power unit, this is a cost-effective way to increase your lifting capacity. Just follow the correct bleeding procedure for safe operation.
Note: Frame-only kits do not include hoses, power units, or fittings.
Warranty Coverage
All TL and TLX models include a 1-year warranty on structure and components. An optional 2-year extended warranty is available.
Features
Factory Preassembled Hydraulics
Each 8000TLX ships with its hydraulic system preassembled at the factory, saving time during setup and ensuring flawless performance right out of the box. You’ll be lifting faster with fewer steps and no guesswork.
Automatic Safety Locks
The 8000TLX includes dual-position automatic safety locks that engage securely as the frames lift. Locks automatically slide into place at both mid-rise and full-rise positions, and a simple flip of the lock bar releases them for smooth, controlled descent.
Extended-Length Power & Clearance
Built for long-wheelbase vehicles, the 8000TLX features a 76-inch frame and 66-inch max lift point spread. With an 8,000-lb. capacity and 24.5-inch lift height, it’s the ideal portable lift for large SUVs, trucks, and specialty sedans with extended chassis requirements.
Upgraded Hydraulic System
The reengineered hydraulic power unit includes a pressure-compensated flow divider and independent shut-off solenoids to ensure both frames rise and lower in perfect sync—critical for heavier vehicles and added safety during operation.
Stronger Frame, Greater Stability
Built with thicker cross members, improved weld geometry, and enhanced pivot joints that resist flex under heavy load. These structural upgrades provide greater confidence when lifting heavier or longer vehicles.
One-Handed Pendant Operation
The pendant control lets you operate the lift with one hand, keeping your other hand free for guiding the frames or handling basic tasks. QuickJack lifts with the push of a button—no bending, cranking, or manual intervention.
Compact Footprint, Extended Utility
Despite its reach and capacity, the 8000TLX lowers to a 3.5-inch profile and rolls easily on built-in urethane wheels. It’s a perfect mobile solution for shops or home garages where versatility and space matter.
Accessories to Increase Versatility
The 8000TLX works with a wide range of QuickJack accessories, including truck and SUV adapters, pinch-weld blocks, and frame extensions. Configure your lift setup to meet your exact needs.
Product Specifications
| General | |
|---|---|
| Material | Steel |
| Assembly Required | true |
| Portable | true |
| Dimensions | |
| Individual Frame Weight (lb) | 114 |
| Lifting Dimensions | |
| Lifting Height w/ 2" Block (in) | 21 |
| Lifting Height w/ 3" Block (in) | 21.75 |
| Lifting Height w/ Stacked Blocks (in) | 24 |
| Maximum Lift Point Spread (in) | 66 |
| Minimum Lift Point Spread (in) | 43 |
| Lifting Capacity | |
| Lifting Capacity (lb) | 8000 |
| Rise | |
| Time to Full Rise (sec) | 26 |
| Locking | |
| Locking Position Qty | 2 |
| Lock Release Type | Single-Point safety release |
| Power | |
| Horsepower | 1 |
| Voltage | 110V 50/60HZ 1PH |
| Amps | 10 |
| Motor | 110V, 60Hz, 1-PH |
| Noise (dB) | 70 |
| Power Unit | 110V, 50-60Hz, 1-Ph. |
| Watts | 1100 |
| Motor RPM | 3450 |
Product Features (Quick List)
- Factory preassembled hydraulics
- Automatic safety locks
- Extended-length power & clearance
- Upgraded hydraulic system
- Stronger frame, greater stability
- One-handed pendant operation
- Compact footprint, extended utility
- Accessories to increase versatility
